Wireless PTZ Security Camera

OHWOAI Wireless PTZ Security Camera

1. Setup Demo Video

Scan the QR code on the original manual or visit YouTube to watch the setup demo video.

2. Packing List

Product sales configuration is different. Please refer to the actual product.

Packing list items

Item	Quantity
Camera	×1
Quick Start Guide	×1
Power Supply for Camera	×1
Screw Package	×2
Certificate	×1

3. Interface Description

3.1 Dome Camera

Dome camera — all components labeled

Component	Description
Antenna (×2)	Dual wireless antennas
Microphone	Built-in audio capture
Infrared LED	Night vision illuminators
Optical Lens	Main camera lens
Photosensitive	Auto day/night switch sensor
Reset Button / TF Card Slot	Visible after unscrewing the cover screw
DC Power Supply	12 V power input
Network Port	Wired Ethernet input
Indicator Light	Network / power status
Base	Mounting base

Feature	Details
TF Card Slot	After inserting a TF card, the system defaults to motion recording.
RESET	Long press for 10 seconds to reset the camera.

4. Working Network Diagram

Working network diagram — camera, router, internet, mobile device

Videos are stored on the TF card in the camera. Once the camera is connected to the router, real-time and playback video can be accessed remotely from your cellphone or computer.

5. Setup and Installation

5.1 Install the Camera

Install both antennas on the camera, then connect the power supply (12 V DC) to the camera.

5.2 App Installation

Search "EseeCloud" on the App Store or "iP PRO" on Google Play to install the app, or scan the QR code in the original manual.

iOS: Requires iOS 9.0 or above
Android: Requires Android 5.1 or above

Click Register to create an account for the first time. Use your cellphone number or email address as your USERNAME and set your password.

Open the App and tap "+" in the upper right corner to enter the scan code interface.
Scan the QR code on the camera. Previously matched cameras will display in the App.

Adding the Camera (AP Hotspot Mode)

Press and hold the Reset Button for 8 seconds while the camera is turned on. The camera will confirm "reset successfully".

Add camera — steps 1–2: scan QR code and add device

In the add device interface, tap "Add".

In your phone's Wi-Fi settings, connect to the IPCXXXXXX hotspot (X is a number). The hotspot password is "11111111".

Add camera — steps 3–5: hotspot connection and app configuration

Switch back to the "eseecloud" app — it will advance automatically. Tap "Remote View", choose your home Wi-Fi network name, enter the password, and confirm.

The app will automatically set up the camera's connection to your Wi-Fi network. Setup is complete.

Add camera — steps 6–7: connecting and naming the device

Set a name for the camera to finish adding it successfully.

5.3 Notifications, Preview, and Playback

Tap the push notification or the "info" button to view alarm information from the station.
Tap "NEWS" to view motion detection alarms from the system.
Tap Playback to view video stored on the device.

Notification and playback — device view and storage playback

5.4 Installation and Placement

5.4.1 Dome Camera

Fix the base with screws.
Adjust the camera's pitch angle to the desired position and tighten the fixing screws.

Dome camera installation — base and angle adjustment

6. Add Camera to Station or NVR

Place the camera and station within 3–5 ft (approx. 1–1.5 m) of each other.

Press and hold the SYNC button of the station for 3 seconds. The system starts to match code and the signal light flashes quickly.

Press and hold the reset button to reset the camera after connecting the power supply. The camera will reset and match code automatically.

After 1 minute, match code ends. The corresponding channel light will be solid on, indicating cameras are coded successfully.

Station/NVR pairing — placement and sync diagram

Add camera into an NVR system: Go to System Menu → Video Manage, click the match code button. The camera will automatically pair with the NVR.

If the camera fails to pair with the Station/NVR, connect the camera to the router or switch using a network cable, then pair again. Disconnect the network cable after successfully pairing the camera to the Station/NVR.

7. FAQ

HERE FOR YOU 24/7

Have an issue? Before you return your product or write a review, please contact our dedicated customer service team directly.

We guarantee a professional service that can fix your issue in a faster, more efficient manner.